Upgrading Weblate¶
Upgrading¶
Generic upgrade instructions¶
Before upgrading, please check current Software requirements as they might have
changed. Once all requirements are installed or updated, please adjust your
settings.py
to match changes in the configuration (consult
settings_example.py
for correct values).
To upgrade database structure, you should run:
./manage.py migrate
To collect new static files, run:
./manage.py collectstatic --noinput
To upgrade default set of privileges definitions (optional), run:
./manage.py setupgroups
To upgrade default set of language definitions (optional), run:
./manage.py setuplang
Изменено в версии 1.2: Since version 1.2 the migration is done using South module, to upgrade to 1.2, please see Version specific instructions.
Изменено в версии 1.9: Since version 1.9, Weblate also supports Django 1.7 migrations, please check Upgrading to Django 1.7 for more information.
Изменено в версии 2.3: Since version 2.3, Weblate supports only Django native migrations, South is no longer supported, please check Upgrading to Django 1.7 for more information.
Version specific instructions¶
Upgrade from 0.5 to 0.6¶
On upgrade to version 0.6 you should run ./manage.py syncdb
and
./manage.py setupgroups --move
to setup access control as described
in installation section.
Upgrade from 0.6 to 0.7¶
On upgrade to version 0.7 you should run ./manage.py syncdb
to
setup new tables and ./manage.py rebuild_index
to build index for
fulltext search.
Upgrade from 0.7 to 0.8¶
On upgrade to version 0.8 you should run ./manage.py syncdb
to setup
new tables, ./manage.py setupgroups
to update privileges setup and
./manage.py rebuild_index
to rebuild index for fulltext search.
Upgrade from 0.8 to 0.9¶
On upgrade to version 0.9 file structure has changed. You need to move
repos
and whoosh-index
to weblate
folder. Also running
./manage.py syncdb
, ./manage.py setupgroups
and
./manage.py setuplang
is recommended to get latest updates of
privileges and language definitions.
Upgrade from 0.9 to 1.0¶
On upgrade to version 1.0 one field has been added to database, you need to invoke following SQL command to adjust it:
ALTER TABLE `trans_subproject` ADD `template` VARCHAR(200);
Upgrade from 1.0 (1.1) to 1.2¶
On upgrade to version 1.2, the migration procedure has changed. It now uses South for migrating database. To switch to this new migration schema, you need to run following commands:
./manage.py syncdb
./manage.py migrate trans 0001 --fake
./manage.py migrate accounts 0001 --fake
./manage.py migrate lang 0001 --fake
Also please note that there are several new requirements and version 0.8 of django-registration is now being required, see Software requirements for more details.
Once you have done this, you can use Generic upgrade instructions.
Upgrade from 1.2 to 1.3¶
Since 1.3, settings.py
is not shipped with Weblate, but only example
settings as settings_example.py
it is recommended to use it as new base
for your setup.
Upgrade from 1.4 to 1.5¶
Several internal modules and paths have been renamed and changed, please adjust
your settings.py
to match that (consult settings_example.py
for
correct values).
- Many modules lost their
weblate.
prefix. - Checks were moved to submodules.
- Locales were moved to top level directory.
The migration of database structure to 1.5 might take quite long, it is recommended to put your site offline, while the migration is going on.
Примечание
If you have update in same directory, stale *.pyc
files might be
left around and cause various import errors. To recover from this, delete
all of them in Weblate’s directory, for example by
find . -name '*.pyc' -delete
.
Upgrade from 1.6 to 1.7¶
The migration of database structure to 1.7 might take quite long, it is recommended to put your site offline, while the migration is going on.
If you are translating monolingual files, it is recommended to rerun quality checks as they might have been wrongly linked to units in previous versions.
Upgrade from 1.7 to 1.8¶
The migration of database structure to 1.8 might take quite long, it is recommended to put your site offline, while the migration is going on.
Authentication setup has been changed and some internal modules have changed
name, please adjust your settings.py
to match that (consult
settings_example.py
for correct values).
Also please note that there are several new requirements, see Software requirements for more details.
Upgrade from 1.8 to 1.9¶
Several internal modules and paths have been renamed and changed, please adjust
your settings.py
to match that (consult settings_example.py
for
correct values).
См.также
If you are upgrading to Django 1.7 in same step, please consult Upgrading to Django 1.7.
Upgrade from 1.9 to 2.0¶
Several internal modules and paths have been renamed and changed, please adjust
your settings.py
to match that (consult settings_example.py
for
correct values).
This upgrade also requires you to upgrade python-social-auth from 0.1.x to 0.2.x series, what will most likely to need to fake one of their migrations (see Upgrading PSA with South for more information):
./manage.py migrate --fake default
См.также
If you are upgrading to Django 1.7 in same step, please consult Upgrading to Django 1.7.
Upgrade from 2.0 to 2.1¶
The filesystem paths configuration has changed, the GIT_ROOT
and
WHOOSH_INDEX
are gone and now all data resides in
DATA_DIR
. The existing data should be automatically migrated by
supplied migration, but in case of non standard setup, you might need to move
these manually.
См.также
If you are upgrading to Django 1.7 in same step, please consult Upgrading to Django 1.7.
Upgrade from 2.1 to 2.2¶
Weblate now supports fulltext search on additional fields. In order to make it work on existing data you need to update fulltext index by:
./manage.py rebuild_index --clean --all
If you have some monolingual translations, Weblate now allows to edit template (source) strings as well. To see them, you need to reload translations, what will either happen automatically on next repository update or you can force it manually:
./manage.py loadpo --all
См.также
If you are upgrading to Django 1.7 in same step, please consult Upgrading to Django 1.7.
Upgrade from 2.2 to 2.3¶
If you have not yet performed upgrade to Django 1.7 and newer, first upgrade to 2.2 following instructions above. Weblate 2.3 no longer supports migration from Django 1.6.
If you were using Weblate 2.2 with Django 1.6, you will now need to fake some migrations:
./manage.py migrate --fake accounts 0004_auto_20150108_1424
./manage.py migrate --fake lang 0001_initial
./manage.py migrate --fake trans 0018_auto_20150213_1447
Previous Weblate releases contained bug which made some monolingual translations behave inconsistently for fuzzy and not translated strings, if you have such, it is recommended to run:
./manage.py fixup_flags --all
См.также
Upgrade from 2.3 to 2.4¶
Handling of static content has been rewritten, please adjust configuration of your webserver accordingly (see Serving static files for more details). Most importantly:
/media/
path is no longer used/static/
path now holds both admin and Weblate static files
There is now also additional dependency - django_compressor
, please install
it prior to upgrading.
См.также
Upgrade from 2.4 to 2.5¶
The fulltext index has been changed, so unless you rebuild it, the fulltext search will not work. To rebuild it, execute:
./manage.py rebuild_index --clean --all
См.также
Upgrade from 2.5 to 2.6¶
Follow generic upgrade instructions, there is no special change.
Notable configuration or dependencies changes:
- new dependecy on Django REST Framework, see Software requirements
- example configuration now configures Django REST Framework, please adjust your settings accordingly
- the USE_TZ settings is now enabled by default
Примечание
Weblate now much more relies on correct site name in the database, please see Set correct site name for instructions how to set it up.
См.также
Upgrade from 2.6 to 2.7¶
Follow generic upgrade instructions, there is no special change.
Notable configuration or dependencies changes:
- new optional dependency on python-bidi, see Software requirements
- Google Web Translation was removed, remove it from your configuration
См.также
Upgrade from 2.7 to 2.8¶
Follow generic upgrade instructions, there is no special change.
Notable configuration or dependencies changes:
- new dependency on defusedxml, see Software requirements
- there is new quality check: Invalid XML markup
См.также
Upgrade from 2.8 to 2.9¶
Please follow generic upgrade instructions, the only notable
change is addition of media storage to DATA_DIR
.
См.также
Upgrade from 2.9 to 2.10¶
Follow generic upgrade instructions, there is no special change.
Notable configuration or dependencies changes:
- The
INSTALLED_APPS
now should includeweblate.utils
. - There is new check in default set (
SamePluralsCheck
). - There is change in
SOCIAL_AUTH_PIPELINE
default settings. - You might want to enable optional Git exporter.
- There is new
RemoveControlChars
in defaultAUTOFIX_LIST
. - If you are using Microsoft Translator, please replace Microsoft Translator with Microsoft Cognitive Services Translator, Microsoft has changed authentication scheme.
См.также
Upgrading to Django 1.7¶
Django 1.7 has a new feature to handle database schema upgrade called «migrations» which is incompatible with South (used before by Weblate).
Before migrating to Django 1.7, you first need to apply all migrations from
South. If you already have upgraded Django to 1.7, you can do this using
virtualenv and examples/migrate-south
script:
examples/migrate-south --settings weblate.settings
Once you have done that, you can run Django migrations and work as usual. For the initial setup, you might need to fake some of the migrations though:
./manage.py migrate --fake-initial
Migrating from Pootle¶
As Weblate was originally written as replacement from Pootle, it is supported
to migrate user accounts from Pootle. All you need to do is to copy
auth_user
table from Pootle, user profiles will be automatically created
for users as they log in and they will be asked to update their settings.
Alternatively you can use importusers
to import dumped user
credentials.